We move with the times – that is why LUTZ BLADES has been one of the leading manufacturers of 3-hole blades for industrial use for decades. This flexibility is also reflected in the application areas of our products: while the models were once used as razor blades, the geometries are now a widely used classic in technical cutting applications.
The high-quality 3-hole blades are used in a wide range of cutting tasks – for example, when cutting paper or when used as a foil blade – and also offer you the right solution for your requirements.
Product recommendation
0400-1200×750
How you benefit
Many years of experience in the production of industrial 3-hole blades
Absolutely consistent quality from blade to blade for successful set use
Hard coatings significantly extend the life of the blades
Cleanroom-suitable packaging – also available in customer presentation
Industrial grade packaging for safe and quick use of the blades on site
How to draw
Razor blade sharpness
Material and coating as required
Different cutting edge geometries, depending on the application
Choice of 1-edged and 2-edged blades
5798
Completed Orders
15
Qualified Engineers
5+
Work Facilities
3+
Worldwide Branches
OUR COMPANY
The wide range of materials for our blades
Our product portfolio offers you blades in thicknesses between 0.06 – 3.0 mm and with final hardnesses between 40 – 85 HRc. You also have a wide choice in our material program:
Standard hard material with high wear resistance and relatively high coefficient of friction (against reference material steel approx. 0.4 to 0.7), usually gold-colored, safe application range up to approx. 300 °C.
TiAlN
Has greater oxidation resistance than TiN with comparable coefficient of friction, usually anthracite blue.
Blueing / Blackening
Applied over the entire surface, light corrosion and starch protection, also serves as a distinguishing aid.
Teflon® (PTFE)
Teflon® non-stick coating (PTFE); due to the very low surface tension, practically no foreign bodies stick to the cutting edge, resistant to acids and alkalis; significantly reduced frictional resistance; the very low static friction allows jerk-free cutting (therefore very suitable for the medical sector); low wear resistance; not suitable for contact with sodium and at temperatures above 250 °C.
TiC
Has lower wear resistance than TiN with significantly lower coefficient of friction (against reference material steel approx. 0.3 to 0.5), usually anthracite colored.
ZrN
With a wear resistance similar to TiN, but denser structure (morphology) than TiN and thus greater resistance to pitting under appropriate load, usually steel colored.
CrN
Has lower wear resistance than TiN. Advantage of CrN: lower residual stresses than TiN. Therefore partially useful for applications with high bending load.
TiCN
Intermediate coating material between the high wear resistance of TiN and the low coefficient of friction of TiC, relative position between TiN and TiC depending on the ratio of C and N, usually anthracite color.
DLC
Has high wear resistance with low coefficient of friction (approx. 0.1 against reference material steel); susceptible to impact loads and high temperatures (between 100 and 300 °C depending on structure).
Color varnish
Applied over the entire surface, serves as a sorting aid for different material thicknesses and as corrosion protection.
Customized quality
Do you need a blade that is tailored to your individual cutting process? Which, even if produced in small quantities, has a near-series quality? Our development department has the right answer to these questions: prototype production by LUTZ BLADES.
How you benefit
Near-series initial samples.
Maximum flexibility = customized blades.
Smallest quantities possible.
Efficient and accelerated product development.
Development and optimization of the blade before series production.
The Lutz BLADES Rapid Prototyping
Cutting of the blade geometry by state-of-the-art machinery and CNC-based grinding of all radii.
Automatic measurement and testing of the tightest tolerances in the process.
Customized heat treatment and coating.
Do you have individual wishes?
Do you have a question? A concern? Or a suggestion? Do not hesitate to contact us. We have the right experts for all matters, who can help you with certainty.
