Blade strip steel
by LUTZ BLADES
Blade strip steel
by LUTZ BLADES
Sharp ground blade strip steel – another specialty of LUTZ BLADES
Sharp ground blade strip steel from LUTZ BLADES provides you with “endless” sharpness. If you need strip material with a sharp cutting edge to manufacture your products, we are your efficient partner. Whether material, hardness, cutting edge geometry or strip dimensions – together with you we determine all important criteria of the blade strip steel so that you receive a product that is perfectly tailored to your requirements.
The versatile coating program
for our blades
TiN
Standard hard material with high wear resistance and relatively high coefficient of friction (against reference material steel approx. 0.4 to 0.7), usually gold-colored, safe application range up to approx. 300 °C.
TiAlN
Has greater oxidation resistance than TiN with comparable coefficient of friction, usually anthracite blue.
Blueing / Blackening
Applied over the entire surface, light corrosion and starch protection, also serves as a distinguishing aid.
Teflon® (PTFE)
Teflon® non-stick coating (PTFE); due to the very low surface tension, practically no foreign bodies stick to the cutting edge, resistant to acids and alkalis; significantly reduced frictional resistance; the very low static friction allows jerk-free cutting (therefore very suitable for the medical sector); low wear resistance; not suitable for contact with sodium and at temperatures above 250 °C.
TiC
Has lower wear resistance than TiN with significantly lower coefficient of friction (against reference material steel approx. 0.3 to 0.5), usually anthracite colored.
ZrN
With a wear resistance similar to TiN, but denser structure (morphology) than TiN and thus greater resistance to pitting under appropriate load, usually steel colored.
CrN
Has lower wear resistance than TiN. Advantage of CrN: lower residual stresses than TiN. Therefore partially useful for applications with high bending load.
TiCN
Intermediate coating material between the high wear resistance of TiN and the low coefficient of friction of TiC, relative position between TiN and TiC depending on the ratio of C and N, usually anthracite color.
DLC
Has high wear resistance with low coefficient of friction (approx. 0.1 against reference material steel); susceptible to impact loads and high temperatures (between 100 and 300 °C depending on structure).
Color varnish
Applied over the entire surface, serves as a sorting aid for different material thicknesses and as corrosion protection.
Customized quality
How you benefit
- Near-series initial samples.
- Maximum flexibility = customized blades.
- Smallest quantities possible.
- Efficient and accelerated product development.
- Development and optimization of the blade before series production.
The Lutz BLADES Rapid Prototyping
- Cutting of the blade geometry by state-of-the-art machinery and CNC-based grinding of all radii.
- Automatic measurement and testing of the tightest tolerances in the process.
- Customized heat treatment and coating.
Do you have individual wishes?
Do you have a question? A concern? Or a suggestion? Do not hesitate to contact us. We have the right experts for all matters, who can help you with certainty.
How can we help you?
We are pleased if we can be of further assistance to you